AW3744

  • Freq: 617-894 / 1695-2690 / 3400 – 3800 / 5150 – 5925MHz
  • Ports: 12 (4P 617-894 / 4P 1695-2690 / 2P 3400-3800 / 2P 5150-5925MHz)
  • Beamwidth: 65⁰
  • Gain: dBi 7 / 14 / 10 / 6
  • Tilt: Fixed
  • Primary Family: Small Cell

Description

The AW3744 is a 12-port multiband small cell panel antenna. This antenna is a visually appealing solution to deliver 4G and 5G services for high-capacity venues, hot spots, and dense urban environments.  The AW3744 supports 617 – 894 MHz with four ports, 1695 – 2690 MHz with four ports, 3300 – 3800 MHz with two ports, and 5150 – 5925 MHz with two ports. This small cell antenna provides a strong signal to noise ratio throughout the entire cell which is afforded through its wide elevation beamwidth and high gain. The optimized side and back lobes reduce sector-to-sector interference, allowing for higher spectrum efficiency. The antenna’s mounting brackets allows mechanical tilt adjustment of the elevation beam tilt which is consistent for all frequencies.

This antenna incorporates wideband technology that extends support down to 600 MHz Band 71. The AW3744 delivers high gain across all bands in a compact radome of 25” height and 13” width. This antenna has a number of mounting options available and is designed to be installed in urban environment where low visual impact is required. The high port count provides support for multiple operators and high data rates across LTE and 5G NR low band, mid band, 3.5 GHz CBRS, and 5 GHz LAA.

Small Cells are a family of ultra-compact antennas which allows for network coverage and capacity increases almost anywhere. This aesthetically pleasing antenna’s small form factor allows for easier architectural approval. A number of mounting options are available and the small cell solutions can be deployed on lamp posts, utility poles, and walls. Small cell antennas support 2×2 MIMO and 4×4 MIMO with fixed and variable electrical tilt of the elevation beam.

Ordering Information:

  • AW3744-T0-F      Zero degrees Fixed Tilt with 4.3-10 Connectors

Features:

  • High Port enabling multiple operators.
  • High Data rate frequency bands covered including Mid-Band, CBRS and LAA.
  • Compact design for low visual impact.
  • Meets current U-NII-1 requirements for gain and upper side lobe performance.
  • Manufactured in Ireland.

DataSheet

Click to Download

Pattern Files

Existing Users Log In
   

You may also like…

Title

Go to Top